Why does the laser cutting machine need to be equipped with a follow-up cutting head
When using a laser cutting machine, the cutting head can walk according to the set cutting trajectory. However, under different data, thickness and cutting methods, the height of the cutting head needs to be adjusted. The distance between the cutting mouth and the cut will affect the quality of the cut and the cut One of the important factors of speed. In addition to selecting the appropriate cutting port type and air pressure parameters according to the cutting conditions, the laser cutting machine must also use different parameters according to the height between the cutting head and the steel plate, the increase or decrease of the cutting data thickness, and the steel plates of different thicknesses. The height of the synchronous cutting opening should be adjusted accordingly.
During the use of the laser cutting machine, in order to ensure a high-quality incision, the height of the incision to the incision must be kept basically the same. Due to the high speed of the laser cutting machine, the operator can see with his eyes and adjust the operation method by hand, and the judgment of the response speed cannot be achieved. Especially when cutting thin plates, or when the surface of the material is grainy, dull, or the cutting processing environment is limited, the cutting height must be firm. In order to make up for the shortcomings of high instability in hand-held cutting during manual cutting, an imported follow-up laser cutting machine is used. No matter how thick the plate is, there is a follow-up cutting head with height adjustment, and the height can be kept consistent.
Its working principle is as follows: two board compartments are formed between the induction ring and the board to be cut, and the working strength is related to the distance between the board compartments.
