Laser marking machine maintenance knowledge
When we use laser marking equipment, if the performance of the equipment is to be stable and the service life is longer, it depends on how you maintain it. The editor gives you some suggestions for reference:
1. There should be no other debris on the equipment, and the surface of the equipment should be kept clean
2. Production operators should strictly follow standard operating procedures for production operations, and random operations are strictly prohibited
3. The equipment circuit must be grounded reliably to protect personal safety
4. The laser marking machine should be replaced with distilled or deionized water regularly, and the water tank should be cleaned carefully when replacing the water.
5. Keep the equipment clean and tidy. It is strictly forbidden to wipe the equipment with a damp cloth, and it is strictly forbidden to clean the equipment with electricity.
6. The equipment should be turned on and off strictly in accordance with the on and off procedures, and random operation is strictly prohibited
7. It is strictly forbidden to start the laser power supply and Q-switch power supply under the condition of no water or abnormal water circulation
8. Computer disk scanning and disk defragmentation should be performed regularly, and junk files should be cleaned up frequently
9. The location of all PLT format files should be fixed and not moved randomly to prevent file damage
10. If the computer crashes or the software does not respond, turn off the galvanometer switch immediately
11. Regularly check the quality and quantity of cooling water, keep the internal circulating water clean, clean the water tank regularly and replace with clean deionized water or pure water
12. It is strictly forbidden for mobile phones and strong magnetic objects to approach the galvanometer of the equipment
13. It is strictly forbidden to turn on the galvanometer when the computer marking software is not open
14. It is forbidden to touch the lens with hands or other objects
15. It is strictly forbidden to move the device without permission
16. Is there any abnormal noise during the operation of the equipment\
17. Whether the equipment is damaged or missing parts
18. If there is a sudden power failure during operation, please press the red button immediately, and pull the switches to the off or stop position one by one, or turn the laser power current adjustment knob to the lowest position
